Megapoxy PF
Rapid Set Epoxy Paste Adhesive
Ideal for civil engineering applications
The high-strength paste that’s perfect when speed and confidence are crucial. PF “hardens as you hold it” for critical repairs to tanks, pipes, machinery, concrete structures and more.
Features & Benefits
- Fast cure: Sets in 7 minutes.
- Ideal for on-the-spot critical repairs and fixings.
- Non-sag for vertical, inclined or overhead work.
- Smooth, workable, easy 1:1 mix ratio.
- High-strength bonds and chemical resistance.
- Two-part solution
Colours
Grey, White
Ideal Uses
Concrete Repair
Fibre Cement Sheet
Bonding Steel to Concrete
Bonding Natural Stone
How to Use
Megapoxy PF is a two-part, rapid set epoxy paste adhesive for many types of bonding and filling applications.
It is available in conveniently pre-packaged 1 litre, 4 litre and 20 litre kits with a simple 1:1 mix ratio.
It has a 3 minute work time and a 1 hour cure time at 25ºC.
Surface Preparation
Before beginning to mix, ensure that all contact surfaces like metal, concrete and stone are clean and free of oil, dust and any other surface contaminants.
Concrete and stone surfaces should be prepared by grinding the surface and removing all the dust and debris.
This helps ensure effective bonding contact.
Compressed air can be used to remove dust from cracks and holes.
Clean metal surfaces with acetone to remove any oils or contaminants.
Safety and PPE
Megapoxy PF is VOC-free. As with all epoxy resins, please wear appropriate PPE, including eyewear gloves and clothing.
Mixing
IMPORTANT. Only make a suitable quantity that can be used within the 3-minute work time!
Megapoxy PF should be mixed on a non-porous, flat surface.
Using individual spatulas for Part A and Part B, measure out equal amounts from their containers. Place them next to each other on the mixing surface. Ensure you have the same height and roundness for both parts BEFORE combining.
To combine, start by using the spatulas to fold part A over part B and then work them together in a zigzag motion.
Make sure to scrape underneath the combined product and onto the flat mixing surface. This will help to collect and combine any unmixed part A or B.
While mixing the epoxy, make sure to clean the spatulas by scraping off any un-combined Part A or part B and then mix thoroughly.
When the epoxy appears completely streak-free and uniform in colour, it’s ready for use.
Application
Megapoxy PF is recommended for bonding pre-cast concrete; natural stone; bricks; ceramics; and metals.
It is ideal for filling and repair of concrete pipes and tanks; fibreglass; patching concrete floors; stairs; concrete columns; and in situ formed concrete.
Because it’s rapid setting, Megapoxy PF can be used in combination with Megapoxy PM to secure vertical articles while it cures.
Applying Megapoxy PF to cracks and holes is easy and fast, and because it’s low-sag and rapid-setting, Megapoxy PF is ideal for overhead or vertical surfaces.
Clean-up
Uncured Megapoxy PF can be cleaned with Megapoxy Thinners. Please Dispose of contents and container in accordance with local, regional, national and international regulations.
Finishing
It will cure stronger than concrete with good chemical resistance.
Once cured, Megapoxy PF can be machined, sanded and polished to a fine finish.
For further technical information, refer to TDS.
What is the mix ratio for Megapoxy PF?
Megapoxy PF has a smooth, workable texture with a simple 1:1 mix ratio, for faster application, less waste and high-strength bonds. See our video for step-by-step instructions.
What is the working time for Megapoxy PF?
Megapoxy PF delivers speed and confidence – with a thee-minute work time and one-hour cure time at 25°C. Megapoxy PF is a high-strength paste that hardens as you hold it, for fast on-the-spot repairs to tanks, pipes, machinery, concrete structures and more.
How can I remove uncured Megapoxy PF?
For fast and effortless removal, use Megapoxy thinners or acetone to wipe away uncured epoxy – and keep your tools and workspace clean.
What the best way to mix Megapoxy PF?
For easy and effective mixing, all you need is a putty knife or spatula and a sturdy mixing board. See our video for step-by-step instructions.
What is the shelf life of Megapoxy PF?
With a two-year shelf life when unopened, Megapoxy PF is on hand when you need it: without the risk of waste or deterioration.
What is the maximum thickness I can apply Megapoxy PF?
Megapoxy PF can be applied up to approximately 50mm in thickness, for deep coverage and lasting strength.
What colour does Megapoxy PF come in?
With Megapoxy PF, you have the choice of grey and white, providing versatility to match your design, needs and project.
What consistency is Megapoxy PF?
Megapoxy PF has a past-like, non-sag consistency like builder’s bog – for ease, flexibility and precision. Its non-sagging properties make it ideal for vertical, inclined or overhead work.
Can I add more Part B to speed up curing of Megapoxy PF?
No, modifying the ratio will alter Megapoxy PF’s chemical properties. Always mix Megapoxy PF according to our guidelines to achieve its proven performance and reliability. And remember we are always here to help with tips and advice.
Can I add water to thin Megapoxy PF?
We don’t recommend adding water to Megapoxy PF, as it will compromise its outstanding strength and robust bonds. Follow our guidelines for powerful performance you can trust. If you have any questions about consistency or thinning, we are here to help.